Lfang-Welding Wire 1.6/2/2.4mm Low Temperature Easy Melt Aluminum Welding Rods Weld Bars Cored Wire Rod Solder No Need Solder Powder, Multipurpose Repair Rods(30pcs 2.4mm)

FeaturesProduct: Aluminum Welding RodsMaterial: AluminumMelting point: above 460Diameter: 1.6mm, 2.0mm,2.4mmLength: 50cmApplications: For Aluminum materialUseNo need solder powder;Great welding effect,with low melting point;Great weldability and corrosion resistance, high thermal conductivity, high electric conductivity;Widely used, mainly used for welding bicycles, locomotive compartments, chemical containers, shipbuilding, etc.;Light weight and easily carry.Instructions for use1. Polish the surface through physical cleaning.2. Heat the surface of the base material at the welding place until the temperature reaches the working temperature of the welding wire 380-460, so that the welding wire can be melted to form a weld by the heat conduction of the base material. Do not use flame to burn the welding wire, and only when the base material is used When the surface temperature is sufficient, the welding wire can flow well and penetrate into the metal capillary.3. When repairing thinner aluminum, just heat the aluminum base material to a suitable working temperature, and then use the welding wire to friction and fuse to form a weld. Only use a metal brush to fill the weld with the molten wire to form a weld.4. Small parts are welded with propane gas, and large parts are heated and welded with industrial gas or induction heating device. After welding, they will naturally slow down.Instructions for use1. Polish the surface through physical cleaning.2. Heat the surface of the base material at the welding place until the temperature reaches the working temperature of the welding wire 380-460, so that the welding wire can be melted to form a weld by the heat conduction of the base material. Do not use flame to burn the welding wire, and only when the base material is used When the surface temperature is sufficient, the welding wire can flow well and penetrate into the metal capillary.3. When repairing thinner aluminum, just heat the aluminum base material to a suitable working temperature, and then use the welding wire to friction and fuse to form a weld. Only use a metal brush to fill the weld with the molten wire to form a weld.4. Small parts are welded with propane gas, and large parts are heated and welded with industrial gas or induction heating device. After welding, they will naturally slow down.Precautions1. The thicker the piece, the more troublesome it will be to heat up, so it is very important to use a reasonable heat source, as long as the surface temperature of the base material reaches that of the welding wire.2. Working temperature, welding can be carried out. When using oxyacetylene welding, use neutral flame welding, but do not use fire welding wire directly3. Applicable heat source: it can be used for many kinds of heat sources, such as propane, oxyacetylene, etc.4. Storage: Store in a ventilated and dry place, can be stored for a long time5. The surface of the base material must be cleaned up. Clean and weld6. The temperature of the base material must reach 400°C, including the temperature of the base material during the welding process, and the temperature can be high or low.7. Taboo use flame to burn the welding wire deliberately. After the base metal temperature reaches 400, the welding wire will naturally melt by the heat conduction of the base metal.

• Great weldability and corrosion resistance, high thermal conductivity, high electric conductivity and excellent processing performance Gets the job done - No need for expensive training or equipment provides you the ability to use this easily whether your a novice or a pro - Easily.
• Easily use in welding of kitchen, furnace, common applications include stainless steel fabrication of dairy, food or restaurant equipment suitable for cryogenic applications
• Material: Aluminum
• Melting point: above 460
• Diameter: 1.6mm, 2.0mm,2.4mm; Length: 50cm